Fixit 3 lb.White epoxy clay sculpting and repair compound

Description

Fixit White - 3 lb.
FIXIT
®
is a 2-part, permanent, universal repair compound used to patch holes and cracks, seal & plug leaks. It has a putty-like consistency, is waterproof, with 0% shrinkage/cracking! Working time is 2-3 hrs., sets rock hard in 24 hrs. FIXIT
®
works wonders for rebuilding & fabricating parts, and as an industrial adhesive compound. Adheres to wood, porcelain, ceramic, metals, stone, glass, cement, tile, masonry, foam, fiberglass, most plastics & more. Use on tough jobs, auto, outdoor & marine projects. FIXIT
®
sets up under water and stands up to UV rays, fuels & heat up to 500 F. Can be seamlessly feathered before set-up, & sanded, tapped, drilled, lathed, carved, or otherwise tooled after set-up, without chipping, cracking or flaking! Simple water clean-up or use Aves
®
Safety Solvent.
FIXIT
®
is a self-hardening, 2-part product (A & B must be mixed)
Blends and smooths easily with water.
Clay/putty-like consistency
Firm feel for modeling/tooling
Resists sagging and drooping
Holds details and impressions
Flat matte finish, accepts paints & stains
Sand to lighten color
Extremely adhesive, durable and strong; stands up to UV, fuels, outdoors, etc.
Adheres to almost any clean surface including antler, bone, ivory, ceramic, fiberglass, foam, glass, metal, plastic, stone, wood, more!
Waterproof
0% shrinkage
Open working time about 4 hours, cures hard overnight (24 hour full cure).
Can be seamlessly feathered before set-up, or can be tapped or drilled, sanded, filed, painted, or otherwise finished to match the repaired item
Non-hazardous; no solvents or fumes
Conforms to ASTM D4236
Easy clean-up with Aves
®
Safety Solvent or soap & water
*Wear appropriate disposable gloves [e.g., vinyl or nitrile] when blending parts A and B... [S 37]
Measure equal parts of A&B; both have a putty-like consistency. Mix & knead together 2 minutes or until thoroughly combined and a uniform color is achieved. *Note that incomplete mixing will give poor results.
FIXIT
®
Sculpt
is now ready to use and has a working time of 3-4 hrs. FIXIT
®
Sculpt can be smoothed or textured with a finger or tool and water before set-up. Paint wet or dry.
Clean up with soap and water or Aves
®
Safety Solvent.
*24 hour cure time is required for product to be waterproof and for hard finishing purposes such as sanding, grinding, drilling, tapping, tooling, carving, lathing, etc.
*Shelf life can be extended by refrigerating or freezing.
FIXIT
®
Sculpt
is freeze-thaw stable.
*Keep containers sealed when not in use.
*Wear goggles & dust mask when sanding or grinding cured
FIXIT
®
Sculpt
... [S 36]
*Keep out of reach of children...[S 2]